JUKI LK1900BHS/MC672 Computer Bar-tacking Machine with Control Panel Assembled with Table and Stand Included

Higher productivity

The machine achieves sewing speed of 3,200sti/min. The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time.

Excellent workability and operability (Low-noise and low-vibration)

The direct-drive head (with no belt), which is directly connected to a compact AC servomotor, achieves outstanding. This head helps create a comfortable working environment with reduced vibration and noise.

The arm section of the machine head is fitted with a hand pulley. This allows the operator to visually check the needle entry points.

Excellent seam quality

Needle thread grasping mechanism helps produce
consistent knot tying at the beginning of sewing. (This device has been factory-set to “invoking prohibited” status at the time of delivery.)

The sewing starting point can be corrected

In cases where the needle entry point for button
sewing is to be corrected, the sewing starting point can be corrected without the adjustment of the relevant mechanism.

Auto-lifter mechanism utilizing a system

The machine is provided as standard with auto-lifter that uses a stepping-motor system. This helps reduce operator fatigue.

It is also possible to change over the stroke of the auto-lifter from a onestep stroke to a double-step stroke, which offers easier positioning of a material on the machine. For the double-step stroke, an intermediate stopping height can be established on the operation panel.

The work clamp foot lift can be set to a maximum of 17mm. (Standard 14mm)

Eco-friendly power saving

An encoder is installed in the pulse motor, thereby
achieving substantially improved power-consumption saving.

LED Light

The LED light can adjust the light intensity to 5 levels, and Off setting is also possible.

The operator can set the brightness which is easy to work, improving work efficiency.